DT Swiss 350 on 29″ ENVE HV60 Rim – Rear

Custom wheel build comprising of:

DT Swiss 350 on ENVE HV60 Rim

DT Swiss 350:

Switzerland is known for its fine chocolate, first-class cheese and wonders of fine mechanics. The attention to detail that these products produce can also be found in the DT Swiss 350 hubs. Above all, love for mechanics can be easily ascertained. The tried and tested toothed disc freewheel with 18 teeth is extremely reliable and must hardly shy away from the comparison with the Swiss movement. The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads that occur. The labyrinth seal system together with abrasive sealing discs and bearing rings made of stainless steel ensure a long durability. Should a service be necessary after ten thousand kilometers, the hubs can be dismantled and serviced within a few minutes without special tools thanks to the DT Swiss plug system.

• The DT Swiss 350 rear wheel hubs can be converted to all standard axle type standard s.
• Material Hub body: Aluminum
• Material Toothed discs: Steel
• Freewheel: SRAM XD
• Freewheel toothing: every 20 (18x per revolution)
• axle type : 12×148 mm thru axle
• Number of holes: 28
• Brake pick-up: IS 6-hole
• Spokes: Black DT Swiss DB

ENVE HV60 Rim:

If youre looking for the ultimate wheel to do it all the ENVE 60 FORTY HV is the best all-rounder on the market and with ENVEs choice between standard and high volume you really can fine tune your wheel build to ensure you acquire the perfect rim for your riding style. These ENVE M60 forty HV are light enough to contend at competition level for cross-country but sturdy enough to tackle descents rowdier than any XC race would throw at you.

ENVE go to great lengths to insure that their rims are built to the highest standards using the latest technology and techniques. Unlike other carbon rim manufacturers ENVE have a moulding process for the spoke and valve holes, this means that the carbon fiber is continuous around the holes allowing for maximum spoke tension. ENVE also mould in a conical nipple seat reducing spoke breakage due to increased nipple articulation. To achieve the incredibly low weights we have all come to expect from ENVE, they have created a removable bladder system which means that no debris is left inside the rim, saving weight for you and making our job of building them easier. All of this is done onsite in Utah, where ENVE regularly torture test their rims, both laterally and with spoke tests, so that their rims meet the UCI guidelines. These are the reasons we at Strada love building and riding ENVE rims.

• Tubeless tape and valve included
• Material: Carbon Fiber
• Rim Depth: 32mm External
• Rim Width: 32mm Internal
• Rim Width: 26mm
• Rim Size: 29″
• Rim: Gray Decals